Glock 17C Gen 3 OEM Slide

The Glock 17C Gen 3 OEM Slide is engineered for shooters seeking enhanced control and reduced muzzle rise. Featuring factory-cut ports on both the slide and barrel, this design channels gas upward to counteract recoil, allowing for faster follow-up shots and improved accuracy. Built from high-strength steel with Glock’s durable Tenifer finish, the 17C slide ensures long-lasting performance and corrosion resistance.

Product Description | Specs for Glock 17C Gen 3 OEM Slide

Glock’s 17C Gen 3 slide incorporates precision-machined compensator ports that align with corresponding barrel cuts. This system effectively mitigates muzzle flip, enhancing shooter control during rapid fire. The slide maintains Glock’s renowned reliability and durability, making it suitable for both competitive shooting and duty use.

What’s Included for Complete OEM Slide:

• Glock 17C Gen 3 complete slide
• Factory-ported 9mm barrel
• Recoil spring assembly (RSA)
• Extractor
• Firing pin safety
• Depressor plunger assembly
• Firing pin assembly
• Rear slide plate
• Channel liner
• Fixed factory sights

What’s Included for Stripped OEM Slide:

• Glock 17C Gen 3 stripped slide
• Channel liner
• OEM sights

Note: The stripped slide does not include the barrel, RSA, or internal components.

Specifications

• Model: Glock 17C Gen 3 OEM Slide
• Finish: Tenifer (matte black)
• Length: 7.32 inches
• Width: 1.00 inch
• Weight (without barrel/RSA): Approximately 6.17 oz
• Optic Ready: No
• Caliber: 9mm

How to Disassemble a Glock 17C Gen 5 OEM Slide

1. Ensure the firearm is unloaded and remove the magazine.
2. Pull the slide slightly rearward and hold it while pulling down the takedown levers.
3. Release the slide forward off the frame.
4. Remove the recoil spring assembly.
5. Lift out the barrel.

How to Install a Glock Slide

1. Insert the barrel into the slide.
2. Place the recoil spring assembly onto the barrel lug.
3. Align the slide with the frame rails.
4. Pull the slide fully rearward and release it to lock into place.
5. Perform a function check to confirm proper operation.

Compatibility with Other Models

Glock designed this slide exclusively for Glock 17 Gen 3 frames. It is not compatible with Gen 4 or Gen 5 frames due to differences in internal dimensions and design changes. This slide also doesn’t work with other Glock models or calibers.

What Is the Glock 17C Gen 3 OEM Slide Made Of?

Glock machines the 17C Gen 3 slide from high-strength steel and applies a Tenifer finish. This finish provides excellent durability, corrosion resistance, and a non-reflective appearance. The ported design enhances performance by reducing muzzle rise.

Customization Options

• Sights: Install aftermarket iron sights for improved visibility.
• Finish: Apply Cerakote or other finishes for a personalized look.
• Engravings: Add custom engravings to make your slide unique.

FAQs

Q: Does the slide come with internal components?
The complete slide includes all upper internals, while the stripped version excludes them.

Q: Is this slide optics-ready?
No, Glock did not design this Gen 3 slide with an optic cut.

Q: Can I use a different caliber barrel in this slide?
No, this slide works only with 9mm barrels and parts.

Q: Does it fit Gen 4 or Gen 5 frames?
No, it only fits Gen 3 Glock 17 frames.

Q: What is the benefit of the ported design?
The ported design reduces muzzle rise, allowing for faster follow-up shots and improved accuracy.

DISCLAIMER

GlockSlide.us provides aftermarket and compatible slides and components for GLOCK pistols. We operate independently and do not represent, endorse or have any connection with GLOCK, Inc. or GLOCK Ges.m.b.H.

GLOCK, Inc. and GLOCK Ges.m.b.H own the trademark “GLOCK” and other related marks. We mention “GLOCK” only to identify parts and products that fit or work with GLOCK pistols.